Prueftechnik Investing in the Future – New High-Tech Lab
Prueftechnik Alignment Systems, the pioneers of Laser Shaft Alignment
Having recently inaugurated a newly-built High-Tech Lab in Ismaning, Germany, PRUEFTECHNIK Alignment Systems -LUDECA’s principals - strengthens its technological prominence and abilities in measurement technology.
The lab includes 2 large granite tables (20 ft. x 6-1/2 ft. and 36 ft. x 1½ ft.) weighing 12 and 11 metric tons, respectively, and a 1½ ton 3D Motion Simulator. The requirements for the measurement and test lab are stringent to the extent that the new optical tabletops have been mounted on a vibration and shock free foundation isolated from the building ensuring that any environmental movement is not transmitted to the tabletop. Tight environmental conditions within the measurement and test room are met. Lighting requirements are provided by 150 LEDs. The installed air conditioning plant regulates the incoming and return air through an elaborate piping system. An accurate equalization of flow ensures that identical environmental conditions exist at every point within the laboratory. The air temperature is stable at 71.6° F (22º C ± 0.1º C). The humidity is maintained at 40%. This new high-tech lab allows development of new sensors, lasers and measurement systems which will further enhance and guarantee the quality of the production units used in maintenance of rotating machinery. It will also satisfy the ever increasing requirements for sub-micron measuring accuracies.
About LUDECA
LUDECA is a vendor of Preventive, Predictive and Corrective Maintenance Tools including laser alignment, vibration analysis and balancing as well as software, services and training. For more information, visit www.ludeca.com
- November 8
Solutions 2.0 Conference - September 5
Mobius Institute Intermediate Vibration Analysis Cat. II - Dungun, Malaysia - September 6
ISO Cat. III Vibration Analysis Training - Antwerp Belgium - September 7
SmartSignal Summit 2010: Avoid Surprises - September 10
Webinar: There’s no ‘I’ in planner: building a team approach to planning & scheduling - September 10
Webinar: Enhanced Electrical Diagnostics through Ultrasound Imaging - September 12
World Energy Congress - September 13
Distribution Packaging and Testing Training in Eden Prairie MN - September 13
Intermediate Vibration Analysis Training Cat. II - Bergen, Norway - September 13
Intermediate Vibration Analysis Training Cat. II - Knoxville, TN
- Reliability Performance Institute Call For Papers
- Things to think about (and do) in 2010
(25) - Reliabilityweb.com 100 Top Web Sites
- The Maintenance Function
- U.S. Energy Information Administration / International Energy Outlook 2010
- Process improvements and cost reduction through reliability enhancements
- Reliability Centered Maintenance report by F Stanley Nowlan and Howard F Heap
- Go Enterprise Wide!
- Reliability Reality in Process Plants - The Archimedean Leap from the “Bathtub”
- The Failure Dilemma!
- Reliabilityweb.com 100 Top Web Sites
- Things to think about (and do) in 2010
(25)
- Reliability Performance Institute Call For Papers
- Electric Motor Bearing Greasing Basics
(2)
- Root Cause Failure Analysis Web Workshops
- Asset Management: concepts and practices
(5)
- The Onesteel Eight Critical Elements of Asset Management
(8)
- Maintenance of Hydraulic Systems
(1)
- Selecting The Right Manufacturing Improvement Tools Web Workshop
(2)
- Maintenance Planning: Back to Basics
(7)
