Predictive or Preventive, That is the Question
There was a time when Preventive Maintenance (PM) was the answer to increasing reliability of systems and equipment. However, PM is usually intrusive and sometimes even harmful to equipment because it may actually introduce a failure mechanism.
Predictive Maintenance (PdM) on the other hand is typically non-intrusive, is easier to schedule because shutdown is not required and actually should be the basis for most of your existing PM work.
Which is better for you personally, surgery to see if you are healthy or some x-rays, blood work or even an MRI to determine what is really going on?
Why is equipment any different? The technology is out there, lets start using it.
Tip provided by: People and Processes, Inc.
Previous tip: Determine Low Voltage Breaker Condition without Intrusive Maintenance
Next tip: If There is No Silver Bullet for Improving Reliability, What Should I do?
« Back to all maintenance tips
Have your say

- Alignment and Balancing
- Asset Management
- CMMS and EAM
- Green Reliability
- Human Asset Management
- Infrared Thermal Imaging
- KPIs - Reliability Performance Metrics
- Lean Maintenance
- Lubrication
- Maintenance Management
- Motor and Power System Testing
- MRO - Spares Management
- Oil and Fluid Analysis
- Planning and Scheduling
- PM Optimization
- Predictive Maintenance and Condition Monitoring Management
- Reliability-Centered Maintenance
- Reliability Engineering
- Reliability Leadership
- Root Cause Analysis
- Shutdowns and Turnarounds
- Total Productive Maintenance (Asset Care)
- Training
- Ultrasonics
- Vibration Analysis

- May 21
Planning for Shutdowns, Turnarounds and Outages - May 21
Reliability Excellence Fundamentals - May 28
LUDECA 1-Day Machinery Alignment Seminar - May 29
LUDECA 1-Day Machinery Alignment Seminar - June 3
Thermal Imaging Conference June 3-6th, 2013 San Diego, CA USA - June 4
3rd Hydro Plant Maintenance and Reliability Conference - June 11
RCM2 Introductory Course - An Aladon Network Course - Denver, CO - June 18
Des-Case 1-day Lubrication Best Practices Workshop - June 18
Materials Management / Storerooms - Houston, TX - June 25
Des-Case 1-day Lubrication Best Practices Workshop




Comments (1)
1) Posted 8:20 am, 07 March 2012 by Steve Quinn