REGISTER NOW! August 1, 2022. FREE 1–Hour Virtual Uptime Elements Introduction

DuPont officials told the CSB that a braided steel hose connected to a one-ton capacity phosgene tank suddenly ruptured, releasing phosgene into the air.  An operator who was exposed to the chemical was transported to the hospital, where he died the following day.

The phosgene release followed two other accidents at the same plant this week, including an ongoing release of chloromethane from the plant’s Hexazinone unit, which went undetected for several days, and a release from a spent sulfuric acid unit.  The plant announced over the weekend that it would be shutting down a number of process units immediately for safety checks.

Speaking for the three-member board, Member William E. Wright said: The Board is concerned by these releases, which had tragic consequences, and will proceed with an investigation to understand why these unfortunate events occurred.  Mr. Wright cautioned that the new case would likely delay efforts to complete other investigations that are being conducted by same investigative team, including those at the Bayer CropScience facility in Institute, West Virginia, and an Ohio environmental services company.  Including DuPont, the CSB has 17 open investigations, the largest number in its 11-year history.

In voting to approve the investigation, the Board noted that the CSB was aware of six other releases from the plant since December 2006.  The DuPont Belle complex is a large facility that is regulated under the EPA Risk Management Program and the OSHA Process Safety Management standard because of the volume and hazards of the materials it handles and the potential risk to workers and the community.

CSB investigator Johnnie Banks will lead the four-member team which is expected at the site on Tuesday.

The CSB is an independent federal agency charged with investigating serious chemical accidents. The agency’s board members are appointed by the president and confirmed by the Senate. CSB investigations look into all aspects of chemical accidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards, and safety management systems.

The Board does not issue citations or fines but does make safety recommendations to plants, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA. Visit our website, www.csb.gov.

For more information, contact Investigations Supervisor John Vorderbrueggen at 202.261.7600.

Upcoming Events

August 9 - August 11 2022

MaximoWorld 2022

View all Events
banner
80% of Reliabilityweb.com newsletter subscribers report finding something used to improve their jobs on a regular basis.
Subscribers get exclusive content. Just released...MRO Best Practices Special Report - a $399 value!
DOWNLOAD NOW
Reliability Leader Fluid Cleanliness Pledge

Fluid Cleanliness is a Reliability Achievement Strategy as well as an asset life extension strategy

MaximoWorld 2022 Conference Austin Texas

Connect with leading maintenance professionals, reliability leaders and asset managers from the world's best-run companies who are driving digital reinvention.

“Steel-ing” Reliability in Alabama

A joint venture between two of the world’s largest steel companies inspired innovative approaches to maintenance reliability that incorporate the tools, technology and techniques of today. This article takes you on their journey.

Three Things You Need to Know About Capital Project Prioritization

“Why do you think these two projects rank so much higher in this method than the first method?” the facilitator asked the director of reliability.

What Is Industrial Maintenance as a Service?

Industrial maintenance as a service (#imaas) transfers the digital and/or manual management of maintenance and industrial operations from machine users to machine manufacturers (OEMs), while improving it considerably.

Three Things You Need to Know About Criticality Analysis

When it comes to criticality analysis, there are three key factors must be emphasized.

Turning the Oil Tanker

This article highlights the hidden trap of performance management systems.

Optimizing Value From Physical Assets

There are ever-increasing opportunities to create new and sustainable value in asset-intensive organizations through enhanced use of technology.

Conducting Asset Criticality Assessment for Better Maintenance Strategy and Techniques

Conducting an asset criticality assessment (ACA) is the first step in maintaining the assets properly. This article addresses the best maintenance strategy for assets by using ACA techniques.

Harmonizing PMs

Maintenance reliability is, of course, an essential part of any successful business that wants to remain successful. It includes the three PMs: predictive, preventive and proactive maintenance.