Infrared inspections often involve analyzing temperature variations on something extremely small or too far away to see the needed detail with standard lenses. Two new lenses for Fluke infrared cameras bring those worlds into sharper focus. The 25 micron macro lens can identify defects that might otherwise be too small to see on targets like PCB boards. The new 4x telephoto lens gets users a four times magnified view of a target at a distance, so targets like a high electrical line or a tall flare stack can be easily inspected.

The two new lenses expand the Fluke portfolio of lenses for select infrared cameras of 320 x 240 resolution and under. The Fluke portfolio of lenses now includes standard, wide angle, macro, and 2x and 4x telephoto lenses-all precisely engineered germanium optics. All these lenses are easily exchanged between compatible cameras without the need to send the lens and camera back to the factory for calibration, eliminating the cost and downtime caused by shipping and additional calibration.

The 4x telephoto lens, which is compatible with Fluke® TiX560, TiX520, Ti400, Ti300, and Ti200 infrared cameras, helps identify problems in power utilities as small as a failed splice on a high electrical line while keeping technicians safely on the ground. In applications like petrochemical and metals refinement where explosive atmospheres, extreme heat, or dangerous electrical levels make keeping a safe distance critical, the telephoto lens makes distant details more viewable while keeping workers at a safer distance.

The 25 micron macro lens, which is compatible with Fluke TiX560 and TiX520 infrared cameras, enables technicians to distinguish thermal variations across distances smaller than a human hair, making it ideal for applications in electronics/PCB board R&D, or anything else requiring near-microscopic level infrared resolution. The LaserSharp® Auto Focus button is used to set the focus at the optimal distance for the lens, eliminating the need to move the focus wheel by tiny amounts to get accurate, in-focus images, speeding infrared measurements.

“These new lenses represent Fluke’s continued drive to listen to and be involved with the application needs of customers,” said Chris Bohn, senior business unit manager for Fluke Thermography. “As technology changes and customers discover new applications for infrared technology, Fluke will continue to innovate in the area of infrared optics, as we have with our camera systems.”

The new lenses will be available from Fluke infrared camera sales channels beginning June 15, 2015. For more information on the Fluke infrared lenses visit: www.fluke.com/tilens.

For information on Fluke tools and applications, or to find the location of your nearest distributor, contact Fluke Corporation, P.O. Box 9090, Everett, WA USA 98206, call (800) 44-FLUKE (800-443-5853), fax (425) 446-5116, e-mail fluke-info@fluke.com or visit the Fluke Web site at http://www.fluke.com.

About Fluke
Founded in 1948, Fluke Corporation is the world leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians, and metrologists who install, troubleshoot and manage industrial, electrical and electronic equipment and calibration processes.

Fluke is a registered trademark of Fluke Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. For more information, visit the Fluke website.

For more information:
Dan Wright
Communications Manager
(425) 446-5638
dan.wright@fluke.com

Upcoming Events

August 9 - August 11 2022

MaximoWorld 2022

View all Events
banner
80% of Reliabilityweb.com newsletter subscribers report finding something used to improve their jobs on a regular basis.
Subscribers get exclusive content. Just released...MRO Best Practices Special Report - a $399 value!
DOWNLOAD NOW
Optimizing Value From Physical Assets

There are ever-increasing opportunities to create new and sustainable value in asset-intensive organizations through enhanced use of technology.

Conducting Asset Criticality Assessment for Better Maintenance Strategy and Techniques

Conducting an asset criticality assessment (ACA) is the first step in maintaining the assets properly. This article addresses the best maintenance strategy for assets by using ACA techniques.

Harmonizing PMs

Maintenance reliability is, of course, an essential part of any successful business that wants to remain successful. It includes the three PMs: predictive, preventive and proactive maintenance.

How an Edge IoT Platform Increases Efficiency, Availability and Productivity

Within four years, more than 30 per cent of businesses and organizations will include edge computing in their cloud deployments to address bandwidth bottlenecks, reduce latency, and process data for decision support in real-time.

MaximoWorld 2022

The world's largest conference for IBM Maximo users, IBM Executives, IBM Maximo Partners and Services with Uptime Elements Reliability Framework and Asset Management System is being held Aug 8-11, 2022

6 Signs Your Maintenance Team Needs to Improve Its Safety Culture

When it comes to people and safety in industrial plants, maintenance teams are the ones who are most often in the line of fire and at risk for injury or death.

Making Asset Management Decisions: Caught Between the Push and the Pull

Most senior executives spend years climbing through the operational ranks. In the operational ranks, many transactional decisions are required each day.

Assume the Decision Maker Is Not Stupid to Make Your Communication More Powerful

Many make allowances for decision makers, saying some are “faking it until they make it.” However, this is the wrong default position to take when communicating with decision makers.

Ultrasound for Condition Monitoring and Acoustic Lubrication for Condition-Based Maintenance

With all the hype about acoustic lubrication instruments, you would think these instruments, once turned on, would do the job for you. Far from it!

Maintenance Costs as a Percent of Asset Replacement Value: A Useful Measure?

Someone recently asked for a benchmark for maintenance costs (MC) as a percent of asset replacement value (ARV) for chemical plants, or MC/ARV%.