LUDECA, Inc. proudly announces their LUBExpert Acoustic Lubrication Solution powered by SDT —the best new way to grease bearings right!

Ultrasound Testing (Ut) and Machinery Lubrication (Lu) are key elements in a successful Asset Condition Management program. At a relatively insignificant capital entry cost, the benefits to reliability and operating cost savings produced by ultrasound assisted lubrication can be truly enormous.

LUBExpert combines SDT’s strong measurement capabilities and clever user interface to create an on-board lubrication and greasing assistant. Intelligent algorithms guide lube-techs before, during, and after re-greasing resulting in optimal lubrication parameters on all assets.

With only a few machine parameters, LUBExpert monitors each stroke of grease and its effect on bearing friction and temperature. Before and after bearing conditions are reported with a “GOOD”, “BAD”, or “SUSPECT” status report.

The LUBExpert package includes the ULTRANALYSIS® SUITE (UAS) software which powers the data management aspects of LUBExpert. With UAS, you can design specific lubrication routes and set intervals based on either calendar or condition. UAS knows the capacity of each bearing so over-lubrication is a thing of the past. You can trend friction levels before and after lubrication and generate grease consumption reports for each asset or for your entire plant.

LUBExpert makes sure bearings are greased right:

  1. It reminds to use the RIGHT LUBRICANT
  2. It guides to the RIGHT LOCATION
  3. It tells to lubricate on the RIGHT INTERVAL
  4. It prevents over and under lubrication with the RIGHT QUANTITY
  5. It gives the RIGHT INDICATORS for lubrication and bearing condition

Watch video and learn more: http://ludeca.com/products/lubexpert-ultrasound-assisted-lubrication

About LUDECA

LUDECA is a leading provider of Predictive and Proactive Maintenance Solutions including laser alignment, ultrasound testing, vibration analysis and balancing equipment as well as related software, rentals, services and training. For more information, visit www.ludeca.com

Upcoming Events

August 9 - August 11 2022

MaximoWorld 2022

View all Events
banner
80% of Reliabilityweb.com newsletter subscribers report finding something used to improve their jobs on a regular basis.
Subscribers get exclusive content. Just released...MRO Best Practices Special Report - a $399 value!
DOWNLOAD NOW
“Steel-ing” Reliability in Alabama

A joint venture between two of the world’s largest steel companies inspired innovative approaches to maintenance reliability that incorporate the tools, technology and techniques of today. This article takes you on their journey.

Three Things You Need to Know About Capital Project Prioritization

“Why do you think these two projects rank so much higher in this method than the first method?” the facilitator asked the director of reliability.

What Is Industrial Maintenance as a Service?

Industrial maintenance as a service (#imaas) transfers the digital and/or manual management of maintenance and industrial operations from machine users to machine manufacturers (OEMs), while improving it considerably.

Three Things You Need to Know About Criticality Analysis

When it comes to criticality analysis, there are three key factors must be emphasized.

Turning the Oil Tanker

This article highlights the hidden trap of performance management systems.

Optimizing Value From Physical Assets

There are ever-increasing opportunities to create new and sustainable value in asset-intensive organizations through enhanced use of technology.

Conducting Asset Criticality Assessment for Better Maintenance Strategy and Techniques

Conducting an asset criticality assessment (ACA) is the first step in maintaining the assets properly. This article addresses the best maintenance strategy for assets by using ACA techniques.

Harmonizing PMs

Maintenance reliability is, of course, an essential part of any successful business that wants to remain successful. It includes the three PMs: predictive, preventive and proactive maintenance.

How an Edge IoT Platform Increases Efficiency, Availability and Productivity

Within four years, more than 30 per cent of businesses and organizations will include edge computing in their cloud deployments to address bandwidth bottlenecks, reduce latency, and process data for decision support in real-time.

MaximoWorld 2022

The world's largest conference for IBM Maximo users, IBM Executives, IBM Maximo Partners and Services with Uptime Elements Reliability Framework and Asset Management System is being held Aug 8-11, 2022