The Sensorex model SX43040 is both lightweight and compact and incorporates MEMS technology with no moving parts, ensuring high-reliability performance within extreme environments. With available measurement ranges from 2 g to 10 g and angular speed ranges from 50°/s to 1500°/s, the model SX43040’s integral digital hybrid compensation (DHC) module allows the IMU to achieve a very high accuracy of <±0.9% FS (gyro <±0.1% FS) after self-compensation of non-linearity, temperature drift, bias and misalignment errors. Bandwidth is fully user adjustable over a range of 0.1 to 100 Hz (-3 dB). Several outputs are simultaneously available, including digital RS485 Modbus RTU, ±5 V analog output and autotest pin, with setup parameters established via the digital interface. The Sensorex model 43040 is designed to reliably operate over a temperature range of -40°C to +75°C (-40°F to +167°F) with a built-in self-test feature on all three axes, ensuring added measurement reliability. In addition, all Sensorex model SX43040 IMU’s are accompanied by a two-year comprehensive product warranty and are available thru both Meggitt’s San Juan Capistrano, California, USA and Archamps, France-based facilities.
With its high-accuracy measurement capabilities, the Sensorex SX43040 is ideal for use a number of testing and on-board applications, such as flight test, road and rail vehicle behavioral studies, control and stabilization, flight control and navigational back-up on aircraft or watercraft, or in any application where rate of acceleration or gravitational force measurements may be required to a high degree of accuracy. For detailed technical specifications, drawings or additional information about the Sensorex SX43040 or other products available from Meggitt Sensing Systems, visit www.meggittsensingsystems.com.
About Meggitt Sensing Systems
Meggitt Sensing Systems, a Meggitt group division (www.meggitt.com), is a leading supplier of high-performance sensing and monitoring systems for physical parameter measurements in extreme environments. It has operated since 1927 through its antecedents-ECET, Endevco, Ferroperm Piezoceramics, Lodge Ignition, Sensorex, Vibro-Meter and Wilcoxon Research-whose portfolios form the basis of product lines offered by today’s Meggitt Sensing Systems. Meggitt’s Endevco® range of piezoelectric, piezoresistive, Isotron® and variable capacitance accelerometers, piezoresistive pressure transducers, acoustic sensors, electronic instruments and calibration systems ensure critical accuracy and reliability within aerospace, automotive, defense, industrial, medical, power generation, R&D, space and test and measurement applications. Endevco® and Isotron® are registered trademarks of the Meggitt group.