CRL 1-hr: 9/26 Introduction to Uptime Elements Reliability Framework and Asset Management System

{image:1}

Newell, WV -- March 28, 2016 -- The BelGAS division of Marsh Bellofram Corporation, a member of the Bellofram Group of Companies, today introduced its Type P203 and P203H pressure reducing regulators for industrial commercial and utility service applications.

Designed for maximum durability, BelGAS P203 and P203H regulators are offered with cast iron bodies, with aluminum bonnets and diaphragm casings and with a durable powder-coated epoxy exterior finish. The regulators are available with a true monitor regulator, which acts independently of the main regulator. The monitor provides equivalent overpressure protection when compared to a standard two-regulator setup; should one regulator fail, the other regulator will provide control and overpressure protection to the system. Units offer installation versatility, internal relief, and fast action to minimize shock. The regulators are available in a wide range of available flow capacities and pressure control ranges.

The BelGAS P203 and P203H is an ideal regulator for medium and large commercial and industrial applications where consumption and usage varies greatly caused by quick acting valves within the systems causing instantaneous load changes and shock. Gas fired production equipment like those found in steel and glass production, and many times installed in boiler applications where large demands are required instantaneously. Large commercial buildings such as schools, universities and offices that have multi-floor heating requirements that require constant, high flow demand on the delivery system. The P203 can be used in a single installation or as a worker / monitor setup.

For more information about BelGAS P203 and P203H pressure reducing regulators or other BelGAS products available from Marsh Bellofram, visit www.marshbellofram.com/belgas.

Upcoming Events

August 8 - August 10, 2023

Maximo World 2023

View all Events
banner
80% of Reliabilityweb.com newsletter subscribers report finding something used to improve their jobs on a regular basis.
Subscribers get exclusive content. Just released...MRO Best Practices Special Report - a $399 value!
DOWNLOAD NOW
Uptime Elements Root Cause Analysis

Root Cause Analysis is a problem solving method. Professionals who are competent in Root Cause Analysis for problem solving are in high demand.

Reliability Risk Meter

The asset is not concerned with the management decision. The asset responds to physics

Why Reliability Leadership?

If you do not manage reliability culture, it manages you, and you may not even be aware of the extent to which this is happening!

Asset Condition Management versus Asset Health Index

Confusion abounds in language. Have you thought through the constraints of using the language of Asset Health?

Seven Chakras of Asset Management by Terrence O'Hanlon

The seven major asset management chakras run cross-functionally from the specification and design of assets through the asset lifecycle to the decommissioning and disposal of the asset connected through technology

Reliability Leader Fluid Cleanliness Pledge

Fluid Cleanliness is a Reliability Achievement Strategy as well as an asset life extension strategy

MaximoWorld 2022 Conference Austin Texas

Connect with leading maintenance professionals, reliability leaders and asset managers from the world's best-run companies who are driving digital reinvention.

“Steel-ing” Reliability in Alabama

A joint venture between two of the world’s largest steel companies inspired innovative approaches to maintenance reliability that incorporate the tools, technology and techniques of today. This article takes you on their journey.

Three Things You Need to Know About Capital Project Prioritization

“Why do you think these two projects rank so much higher in this method than the first method?” the facilitator asked the director of reliability.

What Is Industrial Maintenance as a Service?

Industrial maintenance as a service (#imaas) transfers the digital and/or manual management of maintenance and industrial operations from machine users to machine manufacturers (OEMs), while improving it considerably.