PRUFTECHNIK has partnered with premium shim supplier Lawton to bring you the absolute higest quality 304 Full Hard Stainless Steel Shims. They are guaranteed to be burr free and measured to meet or exceed the industry standards on nominal thicknesses. With 6 sizes and 13 thicknesses we are sure to meet your needs. 

Lawton Industrial Shims: Known Industry wide as the inventor and original manufacturer of pre-cut stainless steel shims.

Industrial Shims Information

  • Shims are cut from the highest quality 304 Full-Hard Stainless Steel.
  • No Sharp Edges or Burrs. 100% Guaranteed.
  • Each shim is permanently marked for easy size and thickness identification.
  • All sizes and thicknesses are available in packets of 20 shims (Size A - D ) and 12 shims (Size G & H).
  • A - D Shims can be ordered either in individual packets or in Full Sets (20 of each shim) or Lightweight Sets (10 of each shim).
  • G & H Shims can be ordered in individual packets or in a Full Set.
  • Every Set comes with a FREE Stainless Steel Organizer Carrying Case.
  • Six sizes will fit motors or generators from 1 - 1000 H.P.
    • Size A: 2” x 2” x 5/8” slot
    • Size B: 3” x 3” x 13/16” slot
    • Size C: 4” x 4” x 1 1/4” slot
    • Size D: 6” x 5” x 1 5/8” slot
    • Size G: 7” x 7” x 1 3/4” slot
    • Size H: 8” x 8” x 2 1/4” slot
  • Shims are available in 13 Thicknesses for precise alignment capabilities: .001”, .002”, .003”, .004”, .005”, .010”, .015”, .020”, .025”, .050”, .075", .100”, .120”

PRUFTECHNIK Inc.
Philadelphia, PA United States
San Diego, CA United States
Laval, QC Canada

www.pruftechnik.com
www.pruftechnik.ca

Upcoming Events

August 9 - August 11 2022

MaximoWorld 2022

View all Events
banner
80% of Reliabilityweb.com newsletter subscribers report finding something used to improve their jobs on a regular basis.
Subscribers get exclusive content. Just released...MRO Best Practices Special Report - a $399 value!
DOWNLOAD NOW
Optimizing Value From Physical Assets

There are ever-increasing opportunities to create new and sustainable value in asset-intensive organizations through enhanced use of technology.

Conducting Asset Criticality Assessment for Better Maintenance Strategy and Techniques

Conducting an asset criticality assessment (ACA) is the first step in maintaining the assets properly. This article addresses the best maintenance strategy for assets by using ACA techniques.

Harmonizing PMs

Maintenance reliability is, of course, an essential part of any successful business that wants to remain successful. It includes the three PMs: predictive, preventive and proactive maintenance.

How an Edge IoT Platform Increases Efficiency, Availability and Productivity

Within four years, more than 30 per cent of businesses and organizations will include edge computing in their cloud deployments to address bandwidth bottlenecks, reduce latency, and process data for decision support in real-time.

MaximoWorld 2022

The world's largest conference for IBM Maximo users, IBM Executives, IBM Maximo Partners and Services with Uptime Elements Reliability Framework and Asset Management System is being held Aug 8-11, 2022

6 Signs Your Maintenance Team Needs to Improve Its Safety Culture

When it comes to people and safety in industrial plants, maintenance teams are the ones who are most often in the line of fire and at risk for injury or death.

Making Asset Management Decisions: Caught Between the Push and the Pull

Most senior executives spend years climbing through the operational ranks. In the operational ranks, many transactional decisions are required each day.

Assume the Decision Maker Is Not Stupid to Make Your Communication More Powerful

Many make allowances for decision makers, saying some are “faking it until they make it.” However, this is the wrong default position to take when communicating with decision makers.

Ultrasound for Condition Monitoring and Acoustic Lubrication for Condition-Based Maintenance

With all the hype about acoustic lubrication instruments, you would think these instruments, once turned on, would do the job for you. Far from it!

Maintenance Costs as a Percent of Asset Replacement Value: A Useful Measure?

Someone recently asked for a benchmark for maintenance costs (MC) as a percent of asset replacement value (ARV) for chemical plants, or MC/ARV%.