{image:1}

Westbury, NY — Fugitive emissions cause production slowdowns, require expensive repairs and can even lead to environmental contamination. But what if you could hear the problem before you could see it?

Whether you’re “looking” for compressed air leaks, natural gas and propane leaks, vacuum leaks or refrigerant leaks the Spectroline® MDE-2000NC Marksman™II ultrasonic diagnostic tool converts and amplifies inaudible ultrasonic sound into audible, natural sound. Now technicians can “hear” even the smallest leaks…before they lead to big concerns.

This cutting-edge tool uses a three step approach to ensure accurate diagnosis

Step 1: The receiver converts inaudible ultrasonic sound into audible sound using heterodyne circuitry.

Step 2: Sound Signature Technology “fine tunes” the audible sound into the natural sound emitted by the leak itself.

Step 3: The unit’s 5-LED signal intensity indicator and audible alarm then pinpoints the exact source of the problem, while an Internal Noise Control (INC) feature shuts out ambient noise sources.

The Marksman II comes complete with: an ultrasonic receiver, full-sized/heavy duty noise-canceling headphones,a hollow air probe (to isolate leak sources in cramped places), a solid contact probe (to find component wear in internal parts and motors), and an ultrasonic emitter (to locate faulty seals, gaskets and weatherstripping in doors, windows, ductwork and other non-pressurized enclosures). The whole kit is packed in a sturdy carrying case.

{image:2}

For more information, visit the website at www.spectroline.com.

Upcoming Events

August 9 - August 11 2022

MaximoWorld 2022

View all Events
banner
80% of Reliabilityweb.com newsletter subscribers report finding something used to improve their jobs on a regular basis.
Subscribers get exclusive content. Just released...MRO Best Practices Special Report - a $399 value!
DOWNLOAD NOW
Conducting Asset Criticality Assessment for Better Maintenance Strategy and Techniques

Conducting an asset criticality assessment (ACA) is the first step in maintaining the assets properly. This article addresses the best maintenance strategy for assets by using ACA techniques.

Harmonizing PMs

Maintenance reliability is, of course, an essential part of any successful business that wants to remain successful. It includes the three PMs: predictive, preventive and proactive maintenance.

How an Edge IoT Platform Increases Efficiency, Availability and Productivity

Within four years, more than 30 per cent of businesses and organizations will include edge computing in their cloud deployments to address bandwidth bottlenecks, reduce latency, and process data for decision support in real-time.

MaximoWorld 2022

The world's largest conference for IBM Maximo users, IBM Executives, IBM Maximo Partners and Services with Uptime Elements Reliability Framework and Asset Management System is being held Aug 8-11, 2022

6 Signs Your Maintenance Team Needs to Improve Its Safety Culture

When it comes to people and safety in industrial plants, maintenance teams are the ones who are most often in the line of fire and at risk for injury or death.

Making Asset Management Decisions: Caught Between the Push and the Pull

Most senior executives spend years climbing through the operational ranks. In the operational ranks, many transactional decisions are required each day.

Assume the Decision Maker Is Not Stupid to Make Your Communication More Powerful

Many make allowances for decision makers, saying some are “faking it until they make it.” However, this is the wrong default position to take when communicating with decision makers.

Ultrasound for Condition Monitoring and Acoustic Lubrication for Condition-Based Maintenance

With all the hype about acoustic lubrication instruments, you would think these instruments, once turned on, would do the job for you. Far from it!

Maintenance Costs as a Percent of Asset Replacement Value: A Useful Measure?

Someone recently asked for a benchmark for maintenance costs (MC) as a percent of asset replacement value (ARV) for chemical plants, or MC/ARV%.