IMC is set to revolutionize how we think about Asset Management. Happening in Marco Island, Dec 16th - 19th 2024

IMC 2024 is designed to equip you with the knowledge, strategies, and tools needed to lead with foresight and innovation.

Sign Up

Please use your business email address if applicable

infrared thermal imaging

DO Sweat the Small Stuff: The Benefit of Inspecting “Small” Equipment With Infrared Thermography

By Dave Sirmans and Roy Huff

The field of Infrared Thermography (IRT) has seen quite a few changes over the years. Camera innovation would be chief among those. Thermography was once upon a time a much more tedious and cumbersome endeavor than it is today.

New Improved Process Sensors Model MB35 Infrared Thermometer

Process Sensors Corporation is proud to release its’ new improved high accuracy, low temperature, Metis Model MB35 sensor series, to its line of precision non-contact infrared pyrometers.

Pempek Inc., Top Commercial Electrical Contractor, Now Provides Infrared Inspections

Infrared Thermography Allows Lead Industrial Electrical Contractor to Identify Problems, Determine Effective Solutions.

IRISS Inc. Opens Asia-Pacific Operations

IRISS Inc. opens Asia-Pacific Operations - Expansion due to dramatically increased opportunities in the APAC region and to greater electrical safety awareness globall

banner
A weekly collection of recommended articles and videos to boost your reliability journey. Right in your inbox
DOWNLOAD NOW

FLIR Transforms Thermal Imaging Marketplace with Three Lines of New Infrared Cameras

Portland, OR - February 1, 2010 - FLIR Systems (NASDAQ: FLIR) unveils three distinct, all-new product lines that dramatically alter the thermal imaging market by expanding options for every budget and application.

The Truth about Infrared

By Wayne Ruddock

There are many misunderstandings about infrared, both in the general public and amongst the practitioners of infrared in the industrial world. Hollywood portrays infrared falsely as a technology that can see through walls and windows and investigate the interior of buildings. It incorrectly depicts it as a technology that will allow you to see if there are any occupants in a building and where they are located, due to their "thermal signatures." This has been seen in a number of Hollywood movies and now has trickled down to television programs such as "CSI."

Using IR for Condition-based Monitoring: Back to the Basics

By Dave Brown, Director, Infrared Training Center, FLIR Systems

Consider the following scenario: A large refinery identifies a problem involving a vacuum leak in a steam-driven crude oil feed pump turbine. After many other test methods fail to pinpoint the problem, infrared thermography finds the issue in minutes: a few loose bolts that need to be tightened. Fixing this problem saves the company millions of dollars annually.

LumaSense expands with infrared acquisition

Camera and sensor company buys L-3 Communications subsidiary InfraredVision Technology Corp.

Sofradir EC, Inc. Receives Patent for Thermal Camera Laser Pointer

Newly patented LazIR-X laser pointer accurately shows location of temperature measurement spot.

NEC Avio Infrared Technologies Introduces New InfReC R300 High-Performance Infrared Camera

Wide application range includes product development, energy audits, R&D, PPM, building inspection

Installation of Infrared Windows (Chapter 6)

Proper installation of the infrared window is critical for the long-term use of the window and for the long-term performance of the electrical panel and equipment enclosure. Before starting an

1. ... 2. Complete an infrared inspection at the end of the window installation in order to create a benchmark/baseline for future inspections.

A Tip on Where to Find the Best Practices for Electrical Equipment Maintenance

It has long been known that "Dependability can be engineered and built into equipment, but effective maintenance is required to keep it dependable". Where do we get the guidelines to ensure the

... Martin Robinson

Leadership Q&A - Tim Rohrer of Exiscan

Terrence O'Hanlon, Publisher at Uptime magazine recently caught up with entrepreneur and innovator Tim Rohrer of Exiscan for a discussion on a new line of Infrared Viewing Windows.

Infrared Safari:  A Photo Essay on the Hunt for Reliability Problems with Thermography

By Michael Stuart

In the animal world, there is a natural law that is seen day in and day out all around the planet Earth. The strong survive the elements and endure hardships and move on to live another day and often prosper. The weak and the sick, however, succumb to the will of the environment or to those who are stronger, faster, or smarter. Such is the way that it has always been... and such is probably the way that it will always be!

Believe it or not, reliability maintenance can be the same way in many respects. We run into the "big elephants" that either stand in the way of progress or threaten to take down the operation in a wild and dramatic rampage. We also find ourselves battling the smaller, yet equally damaging issues ("hyenas") that creep up quietly and quickly and pick off the smaller things for which we have responsibility. Either way, if we do not have the proper tools to deal with these threats, we must live in continuing fear of potential loss... financial, time, productivity, energy, and sometimes even personnel.
If a picture is worth a thousand words, then an "infrared picture" should surely be worth ten thousand! The images and captions that follow represent an "infrared photo safari" of our world and the beasts that we see every day.

New Wahl Thermal Imager easily detects building problems

Asheville, NC - November 23, 2010 - Wahl Instruments Inc. announces the addition of the HSI3000B to its line of Wahl Heat Spy® Thermal Imaging Cameras.  This new thermal imaging camera for buildings is the best equipped entry level device on the market - with the highest specification in its class. Developed specifically for building diagnostics, thermographers and building maintenance staff alike will be able to afford this simple to operate device.

A Fun But Not Too Scientific Way to Determine the Spot Size of Your Infrared Camera!

Here is another fun but not too scientific way to determine the spot size of your Infrared camera:

1. Cut a one inch round hole in a paper plate.

2. Convince a co-worker that this will

...

Three New Infrared Thermal Imagers

Guangzhou, China—A new generation of infrared camera with high performance and competitive pricing has been launched by SATIR.

Want to be there for the ‘Big Game’ in Texas in February 2011?

Fluke announces the 2010 Fluke Football BIG GAME Sweeps. One lucky person-a licensed contractor or individual in a professional trade-

Fluke announces exciting sweepstakes for customers Winner and companion fly free to Texas

EVERETT, Wash. - Fluke Corporation, the global leader in portable electronic test and measurement technology, will send a lucky professional and companion to Arlington, Texas for football’s “Big Game,” simply for learning about the innovative new tools Fluke has recently introduced.

ChatGPT with
ReliabilityWeb:
Find Your Answers Fast
Start