mro - spares management

General Rules which must be followed:

1. Never over torque a Fastener. To over-torque a Fastener can cause it to stretch beyond normal limits causing Fastener breakage, or loosening of Fastener
2. Never under torque Fasteners because it can cause the Fastener to loosen to break
3. Ensure you know the torque specification
4. Ensure you know the torque specification if you are using a Fastener with lubricant on it or dry
5. As a general rule Fasteners should be lubricated unless manufacturer states otherwise
6. Know how to use a torque wrench. When all else fails read the instructions.
7. When unsure whether a Fastener should be torque to a specification, torque it
8. Do not re-use a Fastener if:
- If it was installed with an impact wrench
- If it could result in a safety risk

Fastener Failure Modes:

• Overloading - Force exceeds Fastener strength, Fastener loosens or shears
• Over-Torque - damaging the threads and deforming the hardware
• Under-Torque - allowing a joint to come loose. It may also allow the joint to flex and thus fail under fatigue.
• Brinelling - caused by poor quality washers, leading to a loss of clamp load and failure of the joint
• Corrosion - caused by the disintegration of an engineered material due to electrochemical oxidation of metals in reaction with an oxidant such as oxygen, this is why Fasteners must be lubricated unless stated by the equipment manufacturer.

Definitions:

Torque Wrench:

• A torque wrench is a tool used• ...

So many have forgotten some of the old school tricks. One that comes to mind is when you have a bolt that has seized use bees wax to help get it loose. As you heat up the part with your torch

...

To stock or not to stock, that is the question. One of the major flaws in most spare parts management systems is the absence of clear criteria on when to stock an item and when not to stock an

...

When needing to hold a small screw or bolt to a driver, a small dab of high viscous grease can do the trick to hold it to the screwdriver or in the socket driver and allow you to reach it back

...

Could you imagine drinking milk weeks or months after the expiration date? We all look at the expiration dates when we purchase products for consumption. It's just the healthy thing to do. Why ...